help-calc

08 Numbers and Units

Qp to Qs Ratio: Pulmonary Flow Explained

Card 08-0349 · Updated · Standard formula, shown below

Qp/Qs ratio 1.00
Pulmonary flow (Qp)
5 L/min
Input
Systemic flow (Qs)
5 L/min
Input
You enter
Pulmonary flow (Qp) (L/min), Systemic flow (Qs) (L/min)
You get
Qp/Qs ratio
Rounding
2 dp

The Qp/Qs ratio compares pulmonary blood flow (Qp) to systemic blood flow (Qs). It is calculated by dividing the volume of blood pumped to the lungs per minute by the volume pumped to the rest of the body per minute, with a normal value of 1:1. This ratio is used primarily in cardiology to quantify the severity of left-to-right shunts, such as atrial septal defects (ASD), ventricular septal defects (VSD), and patent ductus arteriosus (PDA).

Formula

The Qp/Qs ratio is defined as:

Qp/Qs = (Pulmonary blood flow) / (Systemic blood flow)

In clinical practice, Qp and Qs are not directly measured as volumes. Instead, they are derived from oxygen saturation data obtained during cardiac catheterization or cardiac MRI. The standard formula uses the Fick principle:

Qp = Oxygen consumption / (Pulmonary venous O₂ content – Pulmonary arterial O₂ content)

Qs = Oxygen consumption / (Systemic arterial O₂ content – Systemic venous O₂ content)

When oxygen consumption cancels out, the ratio simplifies to:

Qp/Qs = (Systemic arterial O₂ sat – Systemic venous O₂ sat) / (Pulmonary venous O₂ sat – Pulmonary arterial O₂ sat)

Each variable in the simplified formula is a percentage oxygen saturation (%). The systemic arterial sample is taken from the aorta or left ventricle, the systemic venous sample from the superior vena cava (SVC), the pulmonary venous sample from the pulmonary veins or left atrium, and the pulmonary arterial sample from the main pulmonary artery.

Worked Example

Using the default values from the calculator above, where Qp = 5.0 L/min and Qs = 5.0 L/min:

  1. Write the ratio: Qp/Qs = 5.0 / 5.0
  2. Divide: 5.0 ÷ 5.0 = 1.0
  3. Result: Qp/Qs = 1.0, meaning pulmonary and systemic flows are equal

This is the expected normal value. A ratio greater than 1.0 indicates a left-to-right shunt (more flow to the lungs), while a ratio less than 1.0 indicates a right-to-left shunt (more flow to the body, often with cyanosis).

How the Ratio Is Measured

Clinicians obtain the oxygen saturation values in one of two main ways:

  • Cardiac catheterization: A catheter is advanced into the heart chambers and great vessels. Blood samples are drawn from the SVC, pulmonary artery, pulmonary vein (or left atrium), and aorta. Oximetry runs on each sample give the saturations used in the formula.
  • Cardiac MRI: Phase-contrast velocity mapping directly measures flow in the aorta and pulmonary artery. This avoids the need for oxygen consumption estimates and is increasingly preferred for follow-up.

The Fick method requires an estimate of oxygen consumption, which is often assumed from body surface area (e.g., 125 mL/min/m²) rather than measured. This assumption introduces error, especially in children or critically ill patients. MRI-derived flows do not rely on this assumption, making them more accurate in many cases.

Interpreting the Result

The ratio is interpreted in the context of symptoms and shunt size:

  • Qp/Qs < 1.5: Small shunt. Often asymptomatic; many clinicians recommend observation without intervention, especially for ASD.
  • Qp/Qs 1.5–2.0: Moderate shunt. May cause mild symptoms such as fatigue or exertional dyspnea. Repair is considered based on symptoms and other findings.
  • Qp/Qs > 2.0: Large shunt. High likelihood of symptoms and long-term pulmonary complications. Surgical or percutaneous closure is usually indicated.
  • Qp/Qs < 1.0: Right-to-left shunt or reversed shunt, indicating pulmonary hypertension (Eisenmenger syndrome). Closure is typically contraindicated.

A ratio of exactly 1.0 can also occur in a patient with a bidirectional shunt where net flows are equal, so the ratio alone does not rule out a shunt. The absolute oxygen saturation values and clinical picture matter.

Common Mistakes and Pitfalls

Several errors can affect the accuracy of the Qp/Qs ratio:

  • Wrong sample site: Using a peripheral venous sample instead of SVC for mixed venous saturation. SVC is preferred because it approximates true mixed venous blood better than a peripheral vein.
  • Ignoring oxygen consumption variability: Assuming a fixed oxygen consumption when the patient is febrile, sedated, or anemic changes the result. Measured oxygen consumption (via indirect calorimetry) is more accurate.
  • Rounding saturations: Saturations are whole percentages; a 1% difference can shift the ratio by 0.1–0.2 in small shunts. Use precise oximetry values.
  • Confusing arterial and venous samples: In the simplified formula, the numerator uses systemic saturations (aortic minus SVC), and the denominator uses pulmonary saturations (pulmonary vein minus pulmonary artery). Swapping these gives the inverse ratio.

In the calculator above, you enter Qp and Qs directly as flow rates (L/min) rather than saturations. This is useful when you have MRI-derived flows or catheter-derived flows already calculated. If you only have saturation values, you must compute Qp and Qs first using the Fick equation with oxygen consumption.

Clinical Context and Limitations

The Qp/Qs ratio is a snapshot, not a complete assessment. It does not tell you the location of the shunt, the right ventricular pressure, or the pulmonary vascular resistance. Two patients with the same Qp/Qs can have very different prognoses if one has normal pulmonary pressures and the other has elevated pressures.

For example, a patient with a VSD and a Qp/Qs of 1.8 may have normal pulmonary artery pressure, while another with the same ratio may have near-systemic pressures. The latter patient is at higher risk for irreversible pulmonary vascular disease. Therefore, the ratio is always interpreted alongside echocardiographic estimates of right ventricular pressure, pulmonary artery pressure, and pulmonary vascular resistance (PVR).

In adults with ASD, a Qp/Qs above 1.5 with evidence of right ventricular volume overload is a common threshold for closure. In children with VSD, the ratio is used together with symptoms and growth failure to decide timing of surgery. The ratio is less useful in patients with complex congenital heart disease where multiple shunts exist, because the simplified formula assumes a single mixing point.

Alternatives to the Qp/Qs Ratio

Other measurements complement or replace the ratio in certain situations:

  • Pulmonary vascular resistance (PVR): Calculated as (mean pulmonary artery pressure – pulmonary capillary wedge pressure) / Qp. This is critical for assessing operability in pulmonary hypertension.
  • Pulmonary-to-systemic resistance ratio (Rp/Rs): Used to decide if a shunt can be closed safely; a ratio above 0.3 often contraindicates closure.
  • Echocardiographic shunt quantification: Doppler-derived velocity and volumetric methods can estimate Qp/Qs non-invasively, though with less accuracy than catheterization or MRI.
  • Exercise testing: In borderline cases, changes in oxygen saturation with exercise can reveal shunt behavior not visible at rest.

Each method has strengths. Catheterization gives pressure data simultaneously, which is essential for surgical planning. MRI gives accurate flow without radiation. Echocardiography is quick and repeatable but operator-dependent.

Frequently Asked Questions

What does a Qp/Qs ratio of 1.2 mean? It indicates a small left-to-right shunt. The lungs receive 20% more blood than the body. In an otherwise healthy person, this is often considered hemodynamically insignificant and may not require intervention, though follow-up is recommended.

Can Qp/Qs be calculated from an echocardiogram? Yes, but indirectly. Echocardiography can measure stroke volumes in the right and left ventricular outflow tracts using Doppler. The ratio of these stroke volumes approximates Qp/Qs, but it is less accurate than catheterization or MRI because of angle errors and diameter measurement variability.

What is a normal Qp/Qs ratio? Exactly 1.0, meaning pulmonary and systemic flows are equal. In healthy individuals, the entire cardiac output goes to the lungs and then to the body, so the flows match. Small variations within 0.9–1.1 are usually measurement noise.

Why is the ratio important before heart surgery? It helps determine whether a shunt is large enough to justify closure and whether the pulmonary circulation can tolerate closure. A very high ratio with low pulmonary resistance usually means closure will improve symptoms. A ratio near 1.0 with high pulmonary resistance suggests the shunt may be protective, and closure could be harmful.

Does the ratio change with exercise? Yes. During exercise, systemic vascular resistance drops and pulmonary resistance may change, altering the balance of flows. In some shunts, the ratio increases with exercise, which can unmask symptoms. This is why exercise testing is sometimes used when resting values are borderline.

What if Qp is less than Qs? This gives a ratio below 1.0, indicating a right-to-left shunt. Deoxygenated blood bypasses the lungs and mixes with systemic blood, causing low oxygen saturation and cyanosis. This is seen in Eisenmenger syndrome and certain complex congenital defects, and it generally precludes shunt closure.

Related

Formula used
in qp | Pulmonary flow (Qp) | L/min | 5.0 | 0 | 20
in qs | Systemic flow (Qs) | L/min | 5.0 | 0 | 20
out ratio | Qp/Qs ratio | - | qp / qs | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.

More on this shelf

The whole Numbers and Units shelf →