This guide explains how to calculate the s/z ratio, a measure used in voice assessment to compare the maximum duration of a sustained /s/ sound (voiceless) to a sustained /z/ sound (voiced). It helps screen for vocal fold pathology and respiratory support issues. You will learn what you need, the step-by-step procedure, common pitfalls, and how to interpret the results.
Formula
The s/z ratio is simply the maximum phonation time (MPT) of /s/ divided by the MPT of /z/:
S/Z Ratio = Duration of /s/ (seconds) ÷ Duration of /z/ (seconds)
Where:
- Duration of /s/ – the longest time (in seconds) you can sustain the voiceless consonant /s/ in one breath.
- Duration of /z/ – the longest time (in seconds) you can sustain the voiced consonant /z/ in one breath.
Both durations are measured in seconds. The ratio is a dimensionless number, typically reported to two decimal places.
Worked Example
Using the default values from the calculator: /s/ = 15 seconds, /z/ = 12 seconds.
Step 1: Identify the durations. s = 15 sec, z = 12 sec.
Step 2: Divide the /s/ duration by the /z/ duration: 15 ÷ 12 = 1.25.
Step 3: The s/z ratio is 1.25.
This matches the calculator’s output (rounded to 2 decimals).
What You’ll Need
- A quiet room with minimal background noise.
- A stopwatch or a timer app on your phone (accuracy to 0.1 sec is fine).
- A recording device (optional but helpful for later analysis).
- A chair or comfortable standing position.
- Water to hydrate your throat beforehand.
- A pen and paper to record your best times.
Step-by-Step
- Prepare your voice: Sit or stand comfortably. Take a few normal breaths, then take a deep breath in and exhale fully. Do this twice to warm up your respiratory system. Drink a sip of water.
- Practice the sounds: Say /s/ (as in “sun”) and /z/ (as in “zebra”) a few times to ensure you can produce them consistently. /s/ is voiceless (no vocal fold vibration), /z/ is voiced (vocal folds vibrate).
- Start with /s/: Take a deep, comfortable breath in. Place the timer ready. As you begin to exhale, produce a steady /s/ sound. Do not push too hard; use a natural, comfortable loudness (like a normal conversation level).
- Time the duration: Start the stopwatch the moment you begin the /s/ sound. Stop the stopwatch when you stop the sound – that is, when you run out of breath and cannot sustain it any longer. Record the time in seconds.
- Rest: Rest for at least 30 seconds to a minute to recover your breath. Do not rush.
- Repeat /s/ two more times: Take two more attempts at /s/, resting between each. Record all three times. The longest of the three is your maximum phonation time for /s/.
- Now for /z/: After a longer rest (1-2 minutes), repeat the same process with the /z/ sound. Take three attempts, resting between each. Record the longest time for /z/.
- Calculate the ratio: Divide your best /s/ time by your best /z/ time. For example, if your best /s/ is 15 sec and best /z/ is 12 sec, the ratio is 15/12 = 1.25.
- Interpret the result: A normal ratio is typically around 1.0 (between 0.8 and 1.2). A ratio above 1.2 suggests a possible issue with vocal fold closure (e.g., vocal fold lesions, paresis) because the voiceless /s/ lasts longer than the voiced /z/. A ratio below 0.8 is less common but may indicate respiratory or other issues. However, this is a screening tool, not a diagnosis.
Common Mistakes
- Using different loudness levels: If you produce /s/ louder than /z/, the durations will be affected. Keep the loudness consistent (e.g., comfortable conversational level).
- Not taking the best of three: Using a single trial can be unreliable. Always take the maximum of at least three attempts for each sound.
- Starting the timer too early or late: Start the timer exactly when the sound begins, not when you start exhaling. Stop exactly when the sound stops.
- Pushing too hard: Forcing a longer duration by using a very loud or strained voice can give falsely high times. Use a natural, steady sound.
- Inconsistent pitch: Singing at a very high or low pitch can affect duration. Use a comfortable, habitual pitch.
- Not resting enough: Fatigue can shorten times. Rest at least 30 seconds between attempts, and longer between /s/ and /z/ sets.
Tips
- Practice a few times before recording your official times to get the hang of it.
- Use a decibel meter app to keep loudness consistent (around 60-70 dB).
- Perform the test at the same time of day, ideally when your voice is rested (not in the morning right after waking, nor after a long day of talking).
- If you have a cold or allergies, postpone the test, as congestion can affect the results.
- Record your attempts with a microphone and analyze the waveform to get precise durations if you want more accuracy.
- Consider doing three sets on different days to get a more reliable baseline.
Troubleshooting
- If your /z/ is much shorter than /s/ (ratio > 1.2): This could indicate vocal fold issues. Try again after resting your voice for a day. If the ratio remains high, consider consulting a speech-language pathologist or an ear, nose, and throat (ENT) doctor.
- If your /s/ is shorter than /z/ (ratio < 0.8): This is less common. It might be due to poor technique (e.g., not producing /s/ correctly) or respiratory issues. Re-check your technique and try again.
- If you cannot sustain a sound for more than a few seconds: This may indicate respiratory weakness or poor breath support. Ensure you are taking a deep breath and using a relaxed exhalation. If it persists, seek professional advice.
- If your times vary wildly between attempts: Make sure you are not talking or swallowing during the sound, and that you are using the same pitch and loudness each time.
- If you feel dizzy or lightheaded: Stop immediately. You may be hyperventilating. Rest and breathe normally. Do not push yourself to the point of discomfort.
Frequently Asked Questions
What is a normal s/z ratio?
A normal ratio is typically around 1.0, with a range of 0.8 to 1.2. Values outside this range may indicate a need for further assessment.
Why do I need to do three attempts?
Taking the best of three attempts helps account for variability due to fatigue, technique, or momentary distractions. It gives a more reliable maximum phonation time.
Can I do this test on myself?
Yes, you can do a basic self-assessment, but it is not a substitute for professional evaluation. If you have concerns about your voice, see a specialist.
What does a high s/z ratio mean?
A high ratio (above 1.2) suggests that the voiced /z/ is shorter than the voiceless /s/, which can indicate vocal fold closure problems, such as nodules, polyps, or paresis. It is a screening sign, not a diagnosis.
Does age or gender affect the ratio?
Age and gender affect absolute phonation times (e.g., women often have shorter times than men), but the ratio is relatively stable across healthy individuals. However, children may have slightly higher ratios due to developing vocal control.
Can I use a smartphone app to time the sounds?
Yes, any stopwatch app works. Some apps even have voice analysis features, but a simple timer is sufficient. Ensure the app measures to at least 0.1 seconds.
Related
Formula used
in s | /s/ duration | sec | 15 | 1 | 60 in z | /z/ duration | sec | 12 | 1 | 60 out ratio | S/Z Ratio | - | s / z | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
- LDL to HDL Ratio: What It Means & How to Calculate It2.00
- Kappa to Lambda Ratio: What It Means & How to Use It
- Jasmine Rice to Water Ratio: Perfect Every Time1.50 cups
- How to Find Decibels from Intensity
- How to Convert to Decibels (dB) Easily
- How to Calculate Decibels of Sound