1. What is the Crushed Stone Calculator?

The Crushed Stone Calculator converts cubic yards of material to tons using a standard conversion factor. This is essential for construction and landscaping projects where materials are ordered by weight.

2. How Does the Calculator Work?

The calculator uses the simple equation:

Where:

• 1.35 — Standard conversion factor (tons per cubic yard)
• Yards — Volume in cubic yards

Explanation: The conversion accounts for the density of typical crushed stone (about 2700 lbs per cubic yard, with 2000 lbs in a ton).

3. Importance of Accurate Calculation

Details: Proper calculation ensures you order the correct amount of material - too little delays projects while too much wastes money on excess material.

4. Using the Calculator

Tips: Enter cubic yards of material needed. The calculator will output the equivalent weight in tons. Always confirm density with your supplier as it may vary slightly.

5. Frequently Asked Questions (FAQ)

Q1: Why is there a conversion factor?
A: Materials are sold by weight (tons) but measured by volume (cubic yards) on site, requiring conversion based on material density.

Q2: Does this work for all types of stone?
A: This uses an average factor. Very dense stone may require up to 1.5, while lighter stone might use 1.1-1.2.

Q3: How accurate is this calculation?
A: For most general purposes it's accurate enough. For precise calculations, get the exact density from your supplier.

Q4: What about compaction?
A: This calculates loose volume. Compacted material will occupy less space but weigh the same.

Q5: How do I measure cubic yards?
A: Length (ft) × Width (ft) × Depth (ft) ÷ 27 = cubic yards.